WebSVN – ESP8266_P1_Meter – /.pio/libdeps/seeed-xiao-esp32-c6/AsyncEspFsWebserver/examples/esp32-cam/camera_pins.h

#pragma once
#include <Arduino.h>
#include "esp_camera.h"
#include <esp_err.h>

// Select camera model
//#define CAMERA_MODEL_WROVER_KIT
//#define CAMERA_MODEL_ESP_EYE
//#define CAMERA_MODEL_M5STACK_PSRAM
//#define CAMERA_MODEL_M5STACK_V2_PSRAM
//#define CAMERA_MODEL_M5STACK_WIDE
//#define CAMERA_MODEL_M5STACK_ESP32CAM
#define CAMERA_MODEL_AI_THINKER
//#define CAMERA_MODEL_TTGO_T_JOURNAL

#if defined(CAMERA_MODEL_WROVER_KIT)
  //
  // ESP WROVER
  // https://dl.espressif.com/dl/schematics/ESP-WROVER-KIT_SCH-2.pdf
  //
  #define PWDN_GPIO_NUM    -1
  #define RESET_GPIO_NUM   -1
  #define XCLK_GPIO_NUM    21
  #define SIOD_GPIO_NUM    26
  #define SIOC_GPIO_NUM    27
  #define Y9_GPIO_NUM      35
  #define Y8_GPIO_NUM      34
  #define Y7_GPIO_NUM      39
  #define Y6_GPIO_NUM      36
  #define Y5_GPIO_NUM      19
  #define Y4_GPIO_NUM      18
  #define Y3_GPIO_NUM       5
  #define Y2_GPIO_NUM       4
  #define VSYNC_GPIO_NUM   25
  #define HREF_GPIO_NUM    23
  #define PCLK_GPIO_NUM    22
  #define LED_PIN           2 // A status led on the RGB; could also use pin 0 or 4
  #define LED_ON         HIGH //
  #define LED_OFF         LOW //
  // #define LAMP_PIN          x // No LED FloodLamp.

#elif defined(CAMERA_MODEL_ESP_EYE)
  //
  // ESP-EYE
  // https://twitter.com/esp32net/status/1085488403460882437
  #define PWDN_GPIO_NUM    -1
  #define RESET_GPIO_NUM   -1
  #define XCLK_GPIO_NUM     4
  #define SIOD_GPIO_NUM    18
  #define SIOC_GPIO_NUM    23
  #define Y9_GPIO_NUM      36
  #define Y8_GPIO_NUM      37
  #define Y7_GPIO_NUM      38
  #define Y6_GPIO_NUM      39
  #define Y5_GPIO_NUM      35
  #define Y4_GPIO_NUM      14
  #define Y3_GPIO_NUM      13
  #define Y2_GPIO_NUM      34
  #define VSYNC_GPIO_NUM    5
  #define HREF_GPIO_NUM    27
  #define PCLK_GPIO_NUM    25
  #define LED_PIN          21 // Status led
  #define LED_ON         HIGH //
  #define LED_OFF         LOW //
  // #define LAMP_PIN          x // No LED FloodLamp.

#elif defined(CAMERA_MODEL_M5STACK_PSRAM)
  //
  // ESP32 M5STACK
  //
  #define PWDN_GPIO_NUM     -1
  #define RESET_GPIO_NUM    15
  #define XCLK_GPIO_NUM     27
  #define SIOD_GPIO_NUM     25
  #define SIOC_GPIO_NUM     23
  #define Y9_GPIO_NUM       19
  #define Y8_GPIO_NUM       36
  #define Y7_GPIO_NUM       18
  #define Y6_GPIO_NUM       39
  #define Y5_GPIO_NUM        5
  #define Y4_GPIO_NUM       34
  #define Y3_GPIO_NUM       35
  #define Y2_GPIO_NUM       32
  #define VSYNC_GPIO_NUM    22
  #define HREF_GPIO_NUM     26
  #define PCLK_GPIO_NUM     21
  // M5 Stack status/illumination LED details unknown/unclear
  // #define LED_PIN            x // Status led
  // #define LED_ON          HIGH //
  // #define LED_OFF          LOW //
  // #define LAMP_PIN          x  // LED FloodLamp.

#elif defined(CAMERA_MODEL_M5STACK_V2_PSRAM)
  //
  // ESP32 M5STACK V2
  //
  #define PWDN_GPIO_NUM     -1
  #define RESET_GPIO_NUM    15
  #define XCLK_GPIO_NUM     27
  #define SIOD_GPIO_NUM     22
  #define SIOC_GPIO_NUM     23
  #define Y9_GPIO_NUM       19
  #define Y8_GPIO_NUM       36
  #define Y7_GPIO_NUM       18
  #define Y6_GPIO_NUM       39
  #define Y5_GPIO_NUM        5
  #define Y4_GPIO_NUM       34
  #define Y3_GPIO_NUM       35
  #define Y2_GPIO_NUM       32
  #define VSYNC_GPIO_NUM    25
  #define HREF_GPIO_NUM     26
  #define PCLK_GPIO_NUM     21
  // M5 Stack status/illumination LED details unknown/unclear
  // #define LED_PIN            x // Status led
  // #define LED_ON          HIGH //
  // #define LED_OFF          LOW //
  // #define LAMP_PIN          x  // LED FloodLamp.

#elif defined(CAMERA_MODEL_M5STACK_WIDE)
  //
  // ESP32 M5STACK WIDE
  //
  #define PWDN_GPIO_NUM     -1
  #define RESET_GPIO_NUM    15
  #define XCLK_GPIO_NUM     27
  #define SIOD_GPIO_NUM     22
  #define SIOC_GPIO_NUM     23
  #define Y9_GPIO_NUM       19
  #define Y8_GPIO_NUM       36
  #define Y7_GPIO_NUM       18
  #define Y6_GPIO_NUM       39
  #define Y5_GPIO_NUM        5
  #define Y4_GPIO_NUM       34
  #define Y3_GPIO_NUM       35
  #define Y2_GPIO_NUM       32
  #define VSYNC_GPIO_NUM    25
  #define HREF_GPIO_NUM     26
  #define PCLK_GPIO_NUM     21
  // M5 Stack status/illumination LED details unknown/unclear
  // #define LED_PIN            x // Status led
  // #define LED_ON          HIGH //
  // #define LED_OFF          LOW //
  // #define LAMP_PIN          x  // LED FloodLamp.

#elif defined(CAMERA_MODEL_M5STACK_ESP32CAM)
  //
  // Common M5 Stack without PSRAM
  //
  #define PWDN_GPIO_NUM     -1
  #define RESET_GPIO_NUM    15
  #define XCLK_GPIO_NUM     27
  #define SIOD_GPIO_NUM     25
  #define SIOC_GPIO_NUM     23
  #define Y9_GPIO_NUM       19
  #define Y8_GPIO_NUM       36
  #define Y7_GPIO_NUM       18
  #define Y6_GPIO_NUM       39
  #define Y5_GPIO_NUM        5
  #define Y4_GPIO_NUM       34
  #define Y3_GPIO_NUM       35
  #define Y2_GPIO_NUM       17
  #define VSYNC_GPIO_NUM    22
  #define HREF_GPIO_NUM     26
  #define PCLK_GPIO_NUM     21
  // Note NO PSRAM,; so maximum working resolution is XGA 1024×768
  // M5 Stack status/illumination LED details unknown/unclear
  // #define LED_PIN            x // Status led
  // #define LED_ON          HIGH //
  // #define LED_OFF          LOW //
  // #define LAMP_PIN          x  // LED FloodLamp.

#elif defined(CAMERA_MODEL_AI_THINKER)
  //
  // AI Thinker
  // https://github.com/SeeedDocument/forum_doc/raw/master/reg/ESP32_CAM_V1.6.pdf
  //
  #define PWDN_GPIO_NUM     32
  #define RESET_GPIO_NUM    -1
  #define XCLK_GPIO_NUM      0
  #define SIOD_GPIO_NUM     26
  #define SIOC_GPIO_NUM     27
  #define Y9_GPIO_NUM       35
  #define Y8_GPIO_NUM       34
  #define Y7_GPIO_NUM       39
  #define Y6_GPIO_NUM       36
  #define Y5_GPIO_NUM       21
  #define Y4_GPIO_NUM       19
  #define Y3_GPIO_NUM       18
  #define Y2_GPIO_NUM        5
  #define VSYNC_GPIO_NUM    25
  #define HREF_GPIO_NUM     23
  #define PCLK_GPIO_NUM     22
  #define LED_PIN           33 // Status led
  #define LED_ON           LOW // - Pin is inverted.
  #define LED_OFF         HIGH //
  #define LAMP_PIN           4 // LED FloodLamp.

#elif defined(CAMERA_MODEL_TTGO_T_JOURNAL)
  //
  // LilyGO TTGO T-Journal ESP32; with OLED! but not used here.. :-(
  #define PWDN_GPIO_NUM      0
  #define RESET_GPIO_NUM    15
  #define XCLK_GPIO_NUM     27
  #define SIOD_GPIO_NUM     25
  #define SIOC_GPIO_NUM     23
  #define Y9_GPIO_NUM       19
  #define Y8_GPIO_NUM       36
  #define Y7_GPIO_NUM       18
  #define Y6_GPIO_NUM       39
  #define Y5_GPIO_NUM        5
  #define Y4_GPIO_NUM       34
  #define Y3_GPIO_NUM       35
  #define Y2_GPIO_NUM       17
  #define VSYNC_GPIO_NUM    22
  #define HREF_GPIO_NUM     26
  #define PCLK_GPIO_NUM     21
  // TTGO T Journal status/illumination LED details unknown/unclear
  // #define LED_PIN           33 // Status led
  // #define LED_ON           LOW // - Pin is inverted.
  // #define LED_OFF         HIGH //
  // #define LAMP_PIN           4 // LED FloodLamp.

#else
  // Well.
  // that went badly...
  #error "Camera model not selected, did you forget to uncomment it in myconfig?"
#endif

camera_config_t camera_config = {
  .pin_pwdn = PWDN_GPIO_NUM,
  .pin_reset = RESET_GPIO_NUM,
  .pin_xclk = XCLK_GPIO_NUM,
  .pin_sscb_sda = SIOD_GPIO_NUM,
  .pin_sscb_scl = SIOC_GPIO_NUM,
  .pin_d7 = Y9_GPIO_NUM,
  .pin_d6 = Y8_GPIO_NUM,
  .pin_d5 = Y7_GPIO_NUM,
  .pin_d4 = Y6_GPIO_NUM,
  .pin_d3 = Y5_GPIO_NUM,
  .pin_d2 = Y4_GPIO_NUM,
  .pin_d1 = Y3_GPIO_NUM,
  .pin_d0 = Y2_GPIO_NUM,
  .pin_vsync = VSYNC_GPIO_NUM,
  .pin_href = HREF_GPIO_NUM,
  .pin_pclk = PCLK_GPIO_NUM,
  .xclk_freq_hz = 20000000,        //XCLK 20MHz or 10MHz
  .ledc_timer = LEDC_TIMER_0,
  .ledc_channel = LEDC_CHANNEL_0,
  .pixel_format = PIXFORMAT_JPEG,  //YUV422,GRAYSCALE,RGB565,JPEG
  .frame_size = FRAMESIZE_SXGA,    //QQVGA-UXGA Do not use sizes above QVGA when not JPEG
  .jpeg_quality = 8,              //0-63 lower number means higher quality
  .fb_count = 2,                    //if more than one, i2s runs in continuous mode. Use only with JPEG
  .fb_location = CAMERA_FB_IN_PSRAM,
  .grab_mode = CAMERA_GRAB_LATEST
};


int lampChannel = 7;           // a free PWM channel (some channels used by camera)
const int pwmfreq = 50000;     // 50K pwm frequency
const int pwmresolution = 9;   // duty cycle bit range
const int pwmMax = pow(2,pwmresolution)-1;

inline esp_err_t init_camera() {
  //initialize the camera
  Serial.print("Camera init... ");
  esp_err_t err = esp_camera_init(&camera_config);

  if (err != ESP_OK) {
    delay(100);  // need a delay here or the next serial o/p gets missed
    Serial.printf("\n\nCRITICAL FAILURE: Camera sensor failed to initialise.\n\n");
    Serial.printf("A full (hard, power off/on) reboot will probably be needed to recover from this.\n");
    return err;
  } else {
    Serial.println("succeeded");

    // Get a reference to the sensor
    sensor_t* s = esp_camera_sensor_get();

    // Dump camera module, warn for unsupported modules.
    switch (s->id.PID) {
      case OV9650_PID: Serial.println("WARNING: OV9650 camera module is not properly supported, will fallback to OV2640 operation"); break;
      case OV7725_PID: Serial.println("WARNING: OV7725 camera module is not properly supported, will fallback to OV2640 operation"); break;
      case OV2640_PID: Serial.println("OV2640 camera module detected"); break;
      case OV3660_PID: Serial.println("OV3660 camera module detected"); break;
      default: Serial.println("WARNING: Camera module is unknown and not properly supported, will fallback to OV2640 operation");
    }
    s->set_sharpness(s, 1);
    s->set_vflip(s, 1);
    //s->set_hmirror(s, 1);

  }
  return ESP_OK;
}
Subversion Repositories ESP8266_P1_Meter

(root)/.pio/libdeps/seeed-xiao-esp32-c6/AsyncEspFsWebserver/examples/esp32-cam/camera_pins.h – Rev 2
